Screws for Bullnose, Square, or LED Aluminum Trim

NOTE: These screws are for our Bullnose, Square, or LED Aluminum Trim.
These are NOT for our No-Drill Trim.

We have these screws that can be used to fasten our trim to your panel. These screws are blunt tipped. They do not have a pointed tip like a standard sheet metal screw. This allows more threads on the screw to "bite" into the aluminum and reduces the risk of dimpling the trim from a pointed screw.

To use these screws, you need to drill blind holes into the backside of the trim using a 3/32" drill bit. These screws will "bite" into the aluminum, and the trim does not need to be tapped. You only need 1/8" to 1/4" of the screw protruding inside the trim, so measure the thickness of your panel, and use the chart below to find the screw size needed. Do not overtighten the screws, they just need to be snug. We sell them in packs of twenty screws. If you want us to drill the trim, please email us. Buying the screws does not include the cost of Krist Kustoms drilling the trim.

These blunt tipped screws aren't a common fastener, so sometimes they are hard for us to locate a supplier that has them in stock. Because of this, you may receive stainless steel screws, zinc screws, or black oxide screws.