NEW!!! - LED No-Drill Aluminum Trim - 72" Strip

"Ground Advantage" is a cheaper option from the USPS (POST OFFICE) for shipping our trim. Please understand that this is an ECONOMICAL option to ship our trim and it is NOT the fastest service available. If you are wanting some of our trim, and have some time to wait, then "Ground Advantage" is a good, low-cost shipping option. We have seen some packages take 2 weeks or more for delivery. There is no way to avoid this using an economical shipping option like "Ground Advantage." If you are needing our trim fairly quickly, we highly suggest using UPS for a more reliable shipping speed.

If you order some of our trim and choose the POST OFFICE "Ground Advantage" shipping option, we CANNOT reship the package with UPS if it takes a while to get to you! Please understand that it may take a few weeks or more for a package to arrive if you choose "Ground Advantage" for shipping and that we cannot reship the package with UPS if it takes a little while.

Our trim is sold in 6 foot long lengths and is considered an oversized package that has a higher shipping rate than smaller boxes.
In October 2024, UPS increased their oversized package surcharge by almost $30.00 on their ground packages. UPS Ground is more expensive than POST OFFICE Ground Advantage, but it is a slightly more reliable service.

Our trim can also be shipped by UPS Next Day Air or Priority Mail, but the oversize surcharge for UPS Next Day Air is fairly expensive. If you want to have some of our aluminum trim shipped Next Day Air or USPS Priority Mail, please call us! We will give you the exact quote over the phone, to make sure the rates are correct and current.

Our extruded aluminum trim is a great way to add some metal trim to your custom interior!

This No-Drill Aluminum Trim measures a little over x” wide, and a bit over x” tall. This trim can be mounted without the need to drill into the aluminum trim. We have two fastener options for attaching this trim: bendable tabs, or screws and nuts. The tabs and screws slide into a “track” inside the trim. For each strip of trim, we send 17 fasteners. This allows you to put a fastener about every 4". You can purchase the trim with tabs, screws/nuts, or a mixture of tabs and screws/nuts. We also sell extra tabs and screws/nuts separately.

Our LED No-Drill Aluminum Trim is sold as a do-it-yourself kit. The light strips do not come installed in the trim. Each 72" strip of aluminum comes with two strips of LEDs that are 36" long each. This allows you to fill the entire strip of aluminum with lights. The aluminum trim can be easily cut and shaped, and the LED strips can be cut as well. The LED strips have wires on both ends, so you could cut the LED strips into up to four separate pieces, per piece of trim. We use an aluminum alloy, 3003, that is easy to bend to bend and shape. The trim comes in the raw extruded finish. It is easy to polish for a shiny finish, or you can give it a brushed look with an abrasive pad. The trim has blunt ends, but the ends are easy to shape with a 3" angle grinder. We recommend bending, shaping, and polishing the aluminum trim to the desired shape first. Please see the video that shows how the ends can be finished to hide the slot in the trim. After you have the desired shape of the trim and are ready to install, clean the groove with alcohol, then install the peel-n-stick LED light strip. We recommend brushing a small amount of adhesive into the groove on the trim, to help with the adhesion of the LED strip. As noted below, the LED light strips can be cut to length. The LEDs operate at 12 volts. The LED strips are not water resistant. These LED strips can be dimmed. We sell a separate LED Dimmer Module to allow you to dim the LED strips. 

Right now, we only sell this trim in 72" long strips. Much longer than that, and the shipping gets VERY expensive! The trim can be tig welded together if you need longer pieces.

SKUs: 72LEDndTRIMkk01t, 72ndLEDTRIMkk01sn, 72ndLEDTRIMkk01tsn